Experiment: Oxygen and Spiking
Let’s recall a former experiment, where we talked about the energy neurons need to continue generating spikes and specifically the energy needed to operate the sodium-potassium pump. This energy is provided by adenosine triphostate, or ATP. ATP is made from the foods you eat, but what else besides food do you need to stay alive? What is invisible, tasteless, void of form, yet critical to your life?
Oxygen! Oxygen is an “oxidizer,” meaning it is greedy for electrons. Pure gaseous elemental oxygen is so electron greedy that it was a poison for most life on Earth a couple billion years ago. In fact, the only elements greedier for electrons are fluorine and chlorine, both of which are still very poisonous in elemental gas form. Once lifeforms evolved to harness oxygen’s electron-grabbing power though, oxygen breathing (“aerobic”) creatures began colonizing Earth.
All animals, like insects, fish, birds, dogs, and you, need oxygen in addition to food to generate enough ATP to stay alive. But how? And why? Time for some biochemistry. For example, here is how your body breaks down the sugar glucose:
This chemical reaction is quite complicated and has dozens of tightly controlled steps that are classed into three pathways, beginning with 1) glycolysis (breakdown of the 6 carbon sugar into 3 carbon pyruvate), to 2) the Krebs (citric acid) cycle, which generates electron-rich molecules with funny names like NADH and FADH, and finally 3) the oxidative phosphorylation pathway, where the electrons from FADH and NADH are transferred though multiple molecules (with more funny names like coenzyme Q and complex IV) before going to the final electron acceptor, oxygen. Oxygen is converted to H2O (water) in the process.
As these electrons move through the successive owners (like coenzyme Q, complex IV, and oxygen) in the oxidative phosphorylation pathway, this creates energy that is used to generate an excess of hydrogen ions (protons) outside the membrane of the mitochondria, the cell organelle where this oxidative phosphorylation pathway occurs. The ionic imbalance, as you can probably surmise, is used to power a very special enzyme, ATP synthase. As the hydrogen ions travel back into the mitochondria by going through the ATP synthase, this causes the synthase to “rotate,” generating the work that, through protein chemistry, converts ADP to ATP.
Now let’s think back to our friend the humble cockroach and his donated leg. While the disconnected leg has enough food stored inside to survive for up to a couple days, the leg does not have enough oxygen to survive for nearly as long. For example, how long can you go without eating? And how long can you survive without breathing?
Let’s see if we can investigate the dependence of oxygen on spikes in your cockroach leg preparation. There are two ways you can do this:
A. The Hard Way Put your cockroach leg and SpikerBox in a positive airflow container. Buy an oxygen tank and an argon tank (typically used as an inert gas), some regulators, some tubing, and hook up the tanks such that you can slowly decrease the percentage of oxygen in your container to see the effect of spiking activity in the cockroach leg.
B. The Easy Way Since the leg of the cockroach gets all its oxygen through the open wound (see our discovery of this when we visited our friendly local electron microscopist), we can “starve” the leg of oxygen by simply liberally coating the leg with petroleum jelly (vaseline).
Let’s focus on the easy way. Here is a video describing the experiment:
For this experiment you need:
- Two cockroach legs from a cockroach
- Two Recording Electrodes
- One SpikerBox (though you will find this experiment easier with two)
- Petroleum Jelly
And the instructions:
- Anesthesize a cockroach in ice water, cut off two legs, and hook up each leg into your SpikerBox as you did in Experiment 1 to test if you can hear spiking. Note that you do not need two SpikerBoxes to do this experiment; you can simply swap out the electrodes that are hooked up to each cockroach leg.
- Liberally coat one leg (the “experimental leg”) with petroleum jelly using a toothpick and start your stopwatch.
- Every 10-15 minutes, manipulate both the control and experimental leg by touching one of the barbs to see if you can evoke spikes.
- After a time, the experimental leg should stop spiking (if it doesn’t you may not have put enough petroleum jelly on the leg to create a good seal against the air.) Mark down the time the spikes stopped.
- Carefully remove the petroleum jelly with a napkin or paper towel. Restart your stopwatch. Every 10-15 minutes attempt to evoke spikes. Eventually they should return. Mark the time at which it does. Again also check if the control is still generating spikes.
- Repeat steps 2-5 as long as you have time for AND as long as the control leg is still generating spikes. Note: why is monitoring the control important?
- Repeat this experiment over a couple legs to see if you can find an “average time for the spikes to go away” and an “average time for the spikes to come back.” Are they different or the same? What would be the reasons? Use the table below as a guide.
Some discussion questions:
1) It’s easy to understand why the spikes eventually go away when you starve the leg of oxygen, but why do the spikes come back? How long can the leg be coated in petroleum jelly before the spikes go away permanently?
2) You’ve probably figured out that the leg eventually dies from drying out. Is there a way you can keep the leg moist, while also allowing oxygen to pass through? Is there any material that is permeable to air but not water?